Industry & Offshore - Diesel
The CD25 range of machines are compact water-blaster machines with high pressure pumps from 170 to 500 Bar, and water flow from 17 to 42 L/min. The pump are driven by a 3 cylinder water cooled Kubota diesel engine and the sturdy all enclosing frame is made in stainless steel for durability and corrosion resistance and powder coated for a nice appearance. The machines have a small foot print off 1200mm x 800mm, the same size as an EUR Pallet. The frames stays solid in place on 4 big rubber feet, one in each corner, and the compact machine have forklift pockets as well as one central lifting eye for easy moveability.
Industry & Offshore - Diesel
The CD50 range of water-blasters and water-jetting machines goes from 230 to 2500 Bar with pump flows from 7 to 74 L/min. The pump are driven by a 4 cylinder water cooled Toyota diesel engine and the all enclosing frame is made in hot dip galvanized steel for durability and corrosion resistance and is primed and painted for a nice appearance. The machine takes up 1550 x 920mm of floor space. The frame are equipped with rubber feet under all four corners and the machine have forklift pockets as well as lifting eyes in all four corners. The machines have galvanized roof plates with side railings for protection and storage of for example high pressure hoses.
Industry & Offshore - Diesel
The CD100 range of water-blasters and water-jetting machines goes from 250 to 200 Bar with pump flows from 21 to 167 L/min. The pump are driven by a 4 cylinder water cooled Turbo charged SISU diesel engine and the all enclosing frame is made in hot dip galvanized steel for durability and corrosion resistance and is primed and painted for a nice appearance. The machine foot print is 2100 x 950mm of floor space. The frame are equipped with rubber feet under all four corners and the machine have forklift pockets as well as lifting eyes in all four corners. The machines have galvanized roof plates with side railings for protection and storage of forexample high pressure hoses.
Industry & Offshore - Diesel
he CD160 range of water-blasters and water-jetting machines goes from 200 to 2500 Bar with pump flows from 25 to 300 L/min. The pump are driven by a 4 cylinder water cooled Turbo charged and intercooled SISU diesel engine and the all enclosing frame is made in hot dip galvanized steel for durability and corrosion resistance and is primed and painted for a nice appearance. The machine foot print is 2250 x 950mm of floor space. The frame are equipped with rubber feet under all four corners and the machine have forklift pockets as well as lifting eyes in all four corners. The machines have galvanized roof plates with side railings for protection and storage of forexample high pressure hoses.
Industry & Offshore - Diesel
The CD550 range of water-blasters and water-jetting machines goes from 1000 to 2000 Bar with pump flows from 100 to 210 L/min. The pump are driven by an 8 cylinder water cooled Turbo charged intercooled Common Rail DEUTZ diesel engine and the 14” container is sound proofed, primed and painted for corrosion resistance and appearance. The container is available in DNV 2.7-1 approved versions. The machines are completely self contained with fuel tank of 1250 Liters. All models are CE marked. Optional flameproofing complying with Zone II, or Norsok Z-015. Optional DNV 2.7-1 approved container.
Industry & Offshore - Diesel Trailer
The CD50 TRAILER range of water-blasters and water-jetting machines goes from 230 to 2000 Bar with pump flows from 11 to 80 L/min. The pump are driven by a 4 cylinder water cooled Toyota diesel engine and the frame inside the trauler is made in hot dip galvanized steel for durability and corrosion resistance and is primed and painted for a nice appearance. The frame with the machine on are easy to slide out for service. The CD50 Trailers can be configured with many different options like hot water boilers, electrical operated hose reels, remote control etc.